The latest design in sand scoop technology for Beach Metal Detecting. (as you can see in video with 9.5 Wet)
We at MetalDetecting.com take beach hunting very seriously.
As an avid detectorist for over 20 years, We felt the need for a slightly better beach scoop than what was available in the market place today. We wanted to bring to you. One that had a wider mouth and released wet sand easily, and was functional when moving from dry sand through wet sand and right into the water without missing a beat. A scoop with the strength of stainless and the light weight of aluminum.
The T-REX bucket is approximately 11” long by 8” wide and 4 7/8” deep. The top of the scoop is 5” deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The Handle tube is angled at about 20 degrees so digging is easier than with a straight up and down handle. This also makes the scoop more balanced and feel lighter when hunting out of water. The 3/8” holes are punched close together to allow for quick sand release and catch those smaller targets that can be missed by larger 1/2” or 5/8”holes. There is no push plate on the back of the scoop for more control and better balance when pushing down into the sand. The gauge of the stainless steel is .075” thick for the stress put on the scoop when digging in wet sand. The weight of the scoop is 3.0 lbs. on a postal scale (without the handle).
Best of all it is made here in the U.S.A.
(The T-REX requires a wooden handle that can be purchased at your local Home Center so there is no down time if you should break your handle.)
The GARRETT PRO-POINTER AT provides all terrain versatility for locating and pinpointing metallic targets. It is environmentally protected from the elements and is fully submersible to a maximum depth of 10 feet or 3 meters..
Subscribe and become part of the our community. Be the first to hear about our latest offers and discounts!